DAIKOWS S2Si

SAW
  • CARBON STEELS
STRUCTURAL STEEL

Description

Solid SAW wire for C-Mn steel
Copper coated wire for submerged arc welding of C-Mn steels, structural steels, pressure vessels steels, fine-grained steels, etc. Suitable for single pass or multipass welding of non alloy steels. It can be used for boilers fabrication, industrial machinery construction, car production. The minimum guaranteed yield reaches a maximum of 460Mpa for applications down to -40 ° C depending on the flux combination. The higher silicon content increases the welding fluidity and improve the bead appearance.
Specifications
ISO 14171-A
S2Si
AWS A5.23
EM12k
Certifications
CE
Shielding
DAIKOFLUX 470-W, 480-W, 490-W
Positions
PA, PB, PC
Current
DC/AC
Packaging Type
K415 spool and drums.
Asme qualifications
F-No (QW432)
6
A-No (QW442)
1
Chem. Comp. %
DEFAULT
C
0.08
Mn
1.15
Ni
0.07
Cr
0.05
P
0.02
S
0.01
Mo
0.02
Si
0.5
Cu
0.1
Mechanical Properties
min
variant
Tensile strength Rm MPa
-
510
Yield strength Rp0.2 MPa
-
410
Elongation A (L0=5d0) %
-
29
Impact Charpy ISO-V
-
60J @ -40°C
Impact Charpy ISO-V
-
-
Welding Parameters
2.4 mm
3.2 mm
4 mm
Ampere
350A - 450A
430A - 530A
480A - 580A
Voltage
26V - 30V
27V - 32V
27V - 32V
Packaging
Ø 2,0÷4,8mm
Ø 2,0÷4,8mm
Ø 2,0÷4,8mm
Packaging Type
K415 spool and drums.
K415 spool and drums.
K415 spool and drums.
Description

Application

Carbon-manganese (C-Mn) steels serve as the predominant structural steels extensively used across various applications in the engineering industry. Successful welding of C-Mn steel fabrications is generally achievable, provided the steel composition is known, necessary precautions are taken, and qualified procedures are adhered to. Weldability varies among C-Mn steels, with potential cracking mechanisms, including hydrogen cracking, solidification cracking, and reheat cracking, depending on specific circumstances. These consumables effectively resist such issues, emphasizing the importance of a meticulous welding procedure. While preheat and post-weld heat treatment (PWHT) may not be universally required, the actual specifications depend on the grade and thickness of the base material being welded. Attaining the required mechanical properties in a welded joint with C-Mn steels is achievable through the use of appropriate welding consumables. However, the intricate structural changes during the weld thermal cycle necessitate careful evaluation of properties such as heat-affected zone (HAZ) toughness and hardness.

Alloy Type

Consumables for welding mild and C-Mn steels of 340-510MPa tensile strength.

Microstructure

Predominantly ferrite.

Materials

Carbon and carbon-manganese steels encompass a wide range of structural and pressure-grade materials commonly used in construction, mechanical engineering, and industrial plant applications. Among the EN-standardized grades are non-alloy structural steels intended for general use, known for their good weldability and progressively higher mechanical strength. The “P” grades, on the other hand, are pressure vessel steels typically used in boilers and heat exchangers. Equivalent ASTM specifications cover a similar scope of applications and are widely adopted internationally for structural components, piping, and fittings exposed to pressure or high temperatures. Lastly, API specifications are typical of the oil & gas sector, particularly for the production of pipelines used in hydrocarbon transport, offering increasing levels of mechanical strength and specific performance requirements.
  • EN W.Nr.: S 235 JR, S 235 J0, S 235 J2+N, S 275, S 275 J0, S 275 J2+N, S 355 JR, S 355 J0, S 355 J2+N, S 355 K2+N, P 235 GH, P 265 GH, P 295 GH
  • ASTM: A36, A106 gr. A, A106 gr. B, A106 gr. C, A139, A210 gr. A1, A210 gr. C, A234 gr. WPB, A334 gr. 1, A216 gr. WCA, A216 gr. WCB, A216 gr. WCC
  • API: A, B, X42, X52, X60

DO YOU NEED HELP?

Go to our dedicated section or contact us
DAIKO supporting the environment
Questo sito si avvale di cookie necessari al suo funzionamento ed utili alle finalità illustrate nella cookie policy.

Carrello

Il carrello è vuoto