DAIKOFCW 102SP

FCAW
  • CARBON STEELS
STRUCTURAL STEEL

Description

All position rutile flux cored wire for welding C and CMn steels
Folded flux cored wire for single or multipass welding C and C-Mn steels up to a yield strength of 460 MPa. Specifically designed for Argon-CO2 welding it ensures good mechanical properties till -20°C. The main features of this wire are excellent weldability in all positions, arc stability, excellent bead appearance, low amount of spatters and easy to remove slag with no porosity issues even on primer plates and very good feeding performance are achievable. This wire has a wider applicable welding condition than solid wire especially for vertical up position.
Specifications
ISO 17632-A
T 46 2 P M 1 H5
AWS A5.20
E71T-1M
Shielding
M21
Positions
PA, PB, PC, PD, PE, PF, PG
Current
DC+
Packaging Type
BS300, D200 spools
Asme qualifications
F-No (QW432)
6
A-No (QW442)
1
Chem. Comp. %
DEFAULT
C
0.05
Mn
1.28
P
0.01
S
0.009
Si
0.52
Mechanical Properties
min
variant
Tensile strength Rm MPa
490
550
Yield strength Rp0.2 MPa
460
490
Elongation A (L0=5d0) %
20
25
Impact Charpy ISO-V
27J @ -20°C
47J @ -20°C
Impact Charpy ISO-V
-
-
Welding Parameters
1.2 mm
1.6 mm
Ampere
130A - 290A
170A - 400A
Voltage
18V - 30V
28V - 32V
Packaging
Ø 1,0÷1,6mm
Ø 1,0÷1,6mm
Packaging Type
BS300, D200 spools
BS300, D200 spools
Description

Application

Carbon-manganese (C-Mn) steels serve as the predominant structural steels extensively used across various applications in the engineering industry. Successful welding of C-Mn steel fabrications is generally achievable, provided the steel composition is known, necessary precautions are taken, and qualified procedures are adhered to. Weldability varies among C-Mn steels, with potential cracking mechanisms, including hydrogen cracking, solidification cracking, and reheat cracking, depending on specific circumstances. These consumables effectively resist such issues, emphasizing the importance of a meticulous welding procedure. While preheat and post-weld heat treatment (PWHT) may not be universally required, the actual specifications depend on the grade and thickness of the base material being welded. Attaining the required mechanical properties in a welded joint with C-Mn steels is achievable through the use of appropriate welding consumables. However, the intricate structural changes during the weld thermal cycle necessitate careful evaluation of properties such as heat-affected zone (HAZ) toughness and hardness.

Alloy Type

Consumables for welding mild and C-Mn steels of 340-510MPa tensile strength.

Microstructure

Predominantly ferrite.

Materials


EN W.Nr.: EN AW-Al 99,0 (1200), EN AW-Al 99,7 (1070A), EN AW-Al 99,5 (1050A), EN AW-Al 99,5 (1350), EN AW-Al 99,8 (1080A).

DO YOU NEED HELP?

Go to our dedicated section or contact us
Daiko supporting the environment
Questo sito si avvale di cookie necessari al suo funzionamento ed utili alle finalità illustrate nella cookie policy.

Carrello

Il carrello è vuoto