Application
This filler metal is a variant of the rolled L605 alloy, renowned for its excellent resistance to thermal fatigue. It is ideal for the restoration and rebuilding of tools used in hot steel processing, such as shears and punches used in the steel industry. The non-magnetic welding metal offers first-rate mechanical strength and maintains good oxidation resistance up to 980 °C. It demonstrates excellent resistance to sulfidation and adequate wear and elongation resistance in metal-to-metal bonds. It also stands out for its resistance to "metal-to-metal" corrosion, abrasion, cavitation, and high-impact at elevated temperatures. It effectively resists oxidation and reducing atmospheres up to 1150 °C. Due to its notable impact resistance, it is widely used for filling molds and dies for hot forming. Its applications extend to the petrochemical sector, high-pressure steam control valves, a wide range of valves, cutting blades, as well as for refilling turbine blades, extrusion molds, dies and forging tools, furnace components, and tools for hot steel processing.
Alloy Type
Cobalt-based alloy with additions of chromium, tungsten and nickel for excellent high temperature strength and oxidation resistance
Microstructure
Chromium and tungsten carbides in an austenitic type matrix.
Materials
It is used for rebuilding and/or hardfacing of tools that work hot steel, such as scissors, punches, etc. for the steel industry.
Welding & PWHT
Before welding, it is essential to thoroughly clean the joint surface and adjacent area. Remove all traces of grease, oil, marker marks, sulfur compounds, and other contaminants. It is important to avoid contact with copper or copper-containing materials in the joint area. Preferably, the alloy should be in the solution annealed condition during welding, although this is not strictly necessary. Preheating is usually not required as long as the base metal exceeds 0 °C. Interpass temperatures must remain low. If necessary, auxiliary cooling methods may be employed between passes, provided they do not introduce contaminants. Generally, no post-weld heat treatment is required.

Products of the line Gr. 25

Product name Process AWS specifications EN ISO specifications
DAIKOWT 1025 GTAW -
EN ISO 14700
S Z Co (L 605)
G-TECH 1025 SMAW -
EN ISO 14700
E Z Co1 (L 605)
DAIKOFCW 1025 FCAW -
EN ISO 14700
T Co1
DAIKOWM 1025 GMAW -
EN ISO 14700
T Z Co (L 605)

DO YOU NEED HELP?

Go to our dedicated section or contact us
DAIKO supporting the environment
Questo sito si avvale di cookie necessari al suo funzionamento ed utili alle finalità illustrate nella cookie policy.

Carrello

Il carrello è vuoto