DAIKOFCW 2553P

FCAW
  • DUPLEX - SUPERDUPLEX
2553

Description

Rutile all position flux cored wire for 25% Cr superduplex ferritic-austenitic stainless steels
Rutile flux cored wire for welding and cladding in all positions thanks to the fast-freezing slag similar alloys base metal. The addition of Cu improves corrosion resistance in sulphuric acid, increases strength and wear resistance. The self-releasing slag makes cleaning and pickling easier providing together with increased travel speeds noticeable savings in time and costs. Applications include pumps and valves, corrosion/wear resisting parts, and process equipment for use in offshore oil and gas industries and chemical plant. The wire shows good wetting behaviour.
Specifications
EN ISO 17633-A
T 25 9 4 Cu NL P M21 1
AWS A5.22
E2594T1-4
Shielding
M21
Positions
PA, PB, PC, PD, PE, PF, PG
Current
DC+
Packaging Type
BS300 spool
Asme qualifications
F-No (QW432)
6
A-No (QW442)
-

Pren

40.695

Hardness

26HRC - 28HRC
Chem. Comp. %
DEFAULT
C
0.03
Mn
1.15
Ni
8.75
Cr
26.35
N
0.02
P
0.015
S
0.002
Mo
4.25
Si
0.5
Cu
1.22
Mechanical Properties
min
variant
Tensile strength Rm MPa
620
880
Yield strength Rp0.2 MPa
550
690
Elongation A (L0=5d0) %
18
25
Impact Charpy ISO-V
-
35J @ -20°C
Impact Charpy ISO-V
-
30J @ -50°C
Welding Parameters
1.2 mm
1.6 mm
Ampere
120A - 240A
200A - 350A
Voltage
20V - 28V
28V - 32V
Packaging
Ø 1,2÷1,6mm
Ø 1,2÷1,6mm
Packaging Type
BS300 spool
BS300 spool
2553
Description

Application

These consumables are specifically designed for welding similar alloys, usually provided in cast form. The addition of copper enhances corrosion resistance in sulfuric acid environments and potentially increases robustness and wear resistance; however, toughness in the welded condition and pitting resistance in chlorinated media are reduced compared to alloys containing less than 1% Cu. Although the composition is carefully controlled to ensure a minimum pitting resistance equivalent (PRE) of 40, beneficial for welding super duplex alloys and maximizing pitting resistance in consumables with less than 1% Cu, it might be preferable to use them in non-sulfuric acid environments, unless a post-weld heat treatment (PWHT) is applied. Applications include
pumps and valves, corrosion and wear-resistant components, and processing equipment intended for use in the offshore oil and gas industries, as well as in the pulp, paper, textile, chemical, and petrochemical sectors.

Alloy Type

25%Cr ferritic-austenitic superduplex stainless steels with nominally 25%Cr-8%Ni-3.5%Mo-1.5%Cu-0.2%N.

Microstructure

In the as-welded, or solution annealed condition, the microstructure is an austenite-ferrite duplex with about 25-60% ferrite.

Materials

  • EN W.Nr.: 1.4515 (G-X3CrNiMoCuN 26 6 3), 1.4517 (G-X3CrNiMoCuN 26 6 3 3)
  • ASTM: A351 & A744 gr. CD4MCu, A890 gr. 1A, A890 gr. 1B
  • UNS: S32550, J93370, J93372, S39255+
  • PROPRIETARY: Ferralium® 255–SD50, 255–SD40 (Langley Alloys), Uranus® 50M, 55, 52N, 52N+, 47N (Industeel), Ferrinox® 255 (Advanced Metals)

Welding & PWHT

For standard welds, no preheating is generally required, and the interpass temperature must be kept below 150 °C. For castings and other highly constrained welding applications, a preheat-interpass temperature range of 100 to 225 °C is advantageous to prevent the risk of hydrogen-induced cracking. Consumables are designed to be used predominantly in the solution annealed condition. Castings invariably require solution annealing, and both the electrode and flux cored wire offer increased robustness with a slight decrease in toughness after solution annealing. The typical post-weld heat treatment is performed at 1120 °C for about 2-3 hours, followed by water quenching.

DO YOU NEED HELP?

Go to our dedicated section or contact us
Contact us
DAIKO supporting the environment
Questo sito si avvale di cookie necessari al suo funzionamento ed utili alle finalità illustrate nella cookie policy.

Carrello

Il carrello è vuoto