DAIKOFCW 2209P

FCAW
  • DUPLEX - SUPERDUPLEX
2209

Description

Rutile all position flux cored wire for 22% Cr duplex stainless steels
Rutile flux cored wire for welding and cladding in all positions thanks to the fast-freezing slag. It offers excellent weldability, easy handling and slag control in all positions resulting in high productivity with outstanding welding performance. It is designed to weld 2205, 2304 and other similar types of duplex. It is used in offshore oil&gas applications and in chemical and petrochemical industries
Specifications
EN ISO 17633-A
T 22 9 3 N L P M21 3
AWS A5.22
E2209T1-4
Shielding
M21
Positions
PA, PB, PC, PD, PE, PF, PG
Current
DC+
Packaging Type
BS300 spool
Asme qualifications
F-No (QW432)
6
A-No (QW442)
-

Ferrite

% 25-50

Pren

36.85
Chem. Comp. %
DEFAULT
C
0.03
Mn
0.8
Ni
9.4
Cr
22.9
N
0.15
P
0.02
S
0.008
Mo
3.5
Si
0.6
Mechanical Properties
min
variant
Tensile strength Rm MPa
550
750
Yield strength Rp0.2 MPa
450
600
Elongation A (L0=5d0) %
20
30
Impact Charpy ISO-V
-
45J @ -20°C
Impact Charpy ISO-V
-
-
Welding Parameters
1.2 mm
1.6 mm
Ampere
120A - 240A
200A - 350A
Voltage
20V - 28V
28V - 32V
Packaging
Ø 1,2÷1,6mm
Ø 1,2÷1,6mm
Packaging Type
BS300 spool
BS300 spool
2209
Description

Application

The 2209 subfamily is used in pipes, plates, fittings, and forgings made from duplex stainless steel. This type of steel has a microstructure composed of about 50% austenite with a ferritic matrix. This composition, together with the general level of alloying, ensures superior strength compared to conventional austenitic steels, such as type 316L. It also offers excellent corrosion resistance in a wide range of environments, along with notable resistance to chloride-induced stress corrosion cracking (CSCC) and pitting attack in chlorinated environments, such as seawater. These characteristics make the alloys particularly appreciated in offshore applications in the oil, gas, chemical, and petrochemical sectors, including piping systems, flow lines, risers, and manifolds.

Alloy Type

22%Cr standard ferritic-austenitic duplex stainless steels.

Microstructure

Multipass welds in the as-welded condition contain about 25–50% ferrite depending on dilution and heat input/cooling rate conditions.

Materials

  • EN W.Nr.: 1.4462 (X2CrNiMoN22-5-3), 1.4362 (X2CrNiN23-4)
  • ASTM: A182 Gr F51, A890 Gr 4A (cast)
  • UNS: S31803, S32205, S32101, S32304, S32001, J92205
  • PROPRIETARY: SAF2205, SAF 2304 (Sandvik), Uranus® 45N, 35N (Industeel), A903 (voestalpine), Cronifer 2205LCN (VDM), Maresist F51 (Schmidt + Clemens), SM22Cr (Nippon Steel Corporation), LDX 2101 (Outokumpu)

Welding & PWHT

Generally, preheating is not necessary for welding. It is advisable to maintain a maximum interpass temperature of 150 °C. The heat input should be between 1.0 and 2.5 kJ/mm, depending on the material thickness; however, some codes limit the value to a maximum of 1.75 or 2.0 kJ/mm. Although welds on duplex stainless steels are almost always left as-welded, solution treatment is generally required for major repairs on castings. Studies and experience have shown that a water quench treatment at 1120 °C for 3-6 hours, with or without a cooling step at 1060 °C before quenching, imparts excellent metallurgical properties.

DO YOU NEED HELP?

Go to our dedicated section or contact us
Contact us
DAIKO supporting the environment
Questo sito si avvale di cookie necessari al suo funzionamento ed utili alle finalità illustrate nella cookie policy.

Carrello

Il carrello è vuoto