- Home
- >
- All DAIKO products
- >
- AUSTENITIC STAINLESS STEELS
- >
- 1899-12-30 16:08:02
1899-12-30 16:08:02
Application
The 16.8.2 consumables have a controlled composition and ferrite,
optimized for performance in structural service at temperatures
up to about 800°C with cryogenic toughness down to -196°C. With Mo specifically at the lower limit for AWS 16.8.2, it is a dilute hybrid between
E308H and E316H. It has applications for welding all the ‘3XXH’ series of
stainless steels which combine creep,
oxidation and general corrosion resistance.
A low total Cr+Mo with controlled C and ferrite content
ensures high resistance to thermal embrittlement by
intermetallic phases with valuable
effects on creep ductility and thermal fatigue. No Bi bearing
constituents are allowed in these consumables, to
ensure <0.002% Bi (API 582).
This weld metal was developed to avoid in service
HAZ failure in 347H and 321H of >12mm thickness.
Applications include **catalytic crackers (cat crackers), cyclones,
transfer lines, furnace parts, thick wall steam piping, superheater
headers, some gas and steam turbine components** used in
petrochemical, chemical process plants and in power generation
industries. Preheat is not required; maximum interpass
temperature 250°C. Welds are left as-welded, no
PWHT required.
Alloy Type
16.8.2 for high temperature 3XXH stainless steels.
Microstructure
Austenite with delta ferrite of 1-6FN typically. Hot
cracking is not reported at low FN.
Materials
EN W.Nr.: 1.4948 ( X 6 CrNi 18 11), 1.4941 ( X 8 CrNiTi 18 10), 1.4961 (X 8 CrNiNb 16 13).
ASTM: 304H, 321H, 347H, 316H.
UNS: S30409, S32109, S34709, S31609.
Products of the line 1899-12-30 16:08:02
Product name | Process | AWS specifications | EN ISO specifications |